Jaguar XK8 & XKR Number Plate Plinth Kit
✔ Made in England
✔ Easily fitted
✔ Fitting intstructions provided
Availability: in stock
Whichever type of mesh grille you have, show it off to best effect by using this kit to lower the number plate and plinth, leaving the grille to speak for itself.
The kit consists of two aluminium brackets in an anodised black finish to match the plinth, plus all the fixings and everything needed to fit it to your car. The brackets are shaped to fit all XK8 and XKR models up to 2003.5.
Fitting Guide
- Remove the existing number plate plinth from the vehicle
- On the reverse of the plinth cut off the plastic spacing lugs
- Place the mounting brackets on the reverse side of the plinth and mark the 2 holes onto the plinth of each bracket, the longer edge fits inside the plinth (Make sure the return edge of the brackets face each other)
- Drill holes with a 3/16 or 4.5mm drill then on the front of the plinth chamfer the holes carefully
- With the screws provided screw the brackets to the plinth
- Offer the plinth to the desired position on the vehicle and mark 1 hole
- Drill with a 6.5mm and bolt the plinth loosely into place
- Next mark the further 3 holes and drill
- Secure the plinth into place with the remaining bolts making sure the large penny washer is behind the nose cone to avoiding the nuts being pulled through
- Fix number plate
- Applicable
- Packaging
- Details
- Measurements